Skip to content

Rotator

The Rotator Tab lets you connect an ASCOM-compatible rotator. A Manual Rotato option is also available

Rotator

  1. Rotator information
  2. Reverse the direction of the rotator (if available). Enable this option, when the rotator moves into the wrong direction during centering and rotation. This is for example required on setups like a Hyperstar where the horizontal image axis is flipped.
  3. Move the rotator to the selected angle

Note

The rotator angle will be synced to the sky angle after a center+rotation happened and will display the sky angle instead of the mechanical angle instead.

Manual Rotator#

Manual Rotator is a very useful tool for those setup that do not have a motorized rotator but still want to be able to match the framing angle as defined in the Framing Tab

To enable manual rotator you must:

  1. Define a Rotator Tolerance in Options->Platesolving
  2. Connect the manual rotator in the Rotator tab
  3. Frame your object in Framing and Add as Sequence Target
  4. Enable Rotate Target in legacy sequencer or use the Slew, center & rotate instruction in the advanced sequencer
  5. Start the sequence

Once the sequence is started and the mount has finished slewing to the target, N.I.N.A. will perform a platesolving to determine the current framing coordinates and rotation angle. If the difference between the angle determined by the platesolving and the angle specified in Sequence ->Rotation is above the Rotator Tolerance, a pop-up will appear indicating the degrees and direction you need to rotate the camera. Rotate the camera and close the manual rotator window, a new platesolve will be performed. If the angle is still above the Rotator Tolerance the process will be repeated.

TargetSettings

ManualRotator

Tip

If you want to set camera rotation before starting the main imaging sequence you can use a dummy sequence with exposure 1s to kick the manual rotator in